Minelab Gold Monster 2000
Multi-Au technology fuses synchronized multi-frequency VLF (12-76 kHz) with a pulse-induction ground engine, so the Gold Monster 2000 holds a stable signal in red dirt and black sand where single-frequency detectors give up.
Factory-Genuine Stock
Authorized, not grey-market
Insured Nationwide Shipping
Delivered anywhere in Pakistan
International Warranty
Honored through our service center
Training on Setup
Included with every purchase
Multi-Au technology fuses synchronized multi-frequency VLF (12-76 kHz) with a pulse-induction ground engine, so the Gold Monster 2000 holds a stable signal in red dirt and black sand where single-frequency detectors give up.
Minelab's newest hybrid pairs synchronized multi-frequency VLF sensing (12-76 kHz) with a pulse-induction ground-processing engine — Multi-Au technology — built for prospectors who've hit the wall single-frequency VLF machines hit in red dirt, black sand, and other difficult, highly mineralized soils.
Echo Wave audio keeps faint gold signals separated from the chatter of hot rocks and iron trash without sacrificing depth, while a 0-99 digital target ID next to the instant Gold Probability indicator turns a maybe-signal into a dig-or-skip decision in seconds.
Easy-Trak ground balance runs continuously in the background; Quick-Trak switches you to a fast manual reset when you need it. Automatic interference cancellation scans for electromagnetic noise sources at power-on, so a nearby generator or another detector doesn't derail a session before it starts.
The telescopic carbon fiber shaft collapses to 65 cm and the whole unit weighs 1.25 kg with the 5-inch GM2000-05 Double-D coil attached — waterproof to a meter, with the control box rain-resistant to IP55 — and runs on a replaceable 2700 mAh lithium-ion battery with a spare on hand for sessions that run long.
Key Features
Hybrid Multi-Au Technology
Synchronized multi-frequency VLF works alongside a PI ground engine for stability single-tech detectors can't match.
12-76 kHz Frequency Range
Wide enough to stay sensitive to gold under 0.01 grams without losing reach on larger pieces.
Echo Wave Audio
Keeps a faint gold signal audible instead of burying it under hot-rock and iron noise.
Gold Probability Indicator + 0-99 Digital ID
Turns a borderline signal into a clear dig-or-skip call before you swing again.
Easy-Trak and Quick-Trak
Choose hands-off continuous tracking or a quick manual reset when the ground changes fast.
Lightweight Carbon Shaft
Collapses to 65 cm and keeps total weight at 1.25 kg for all-day comfort.
Replaceable Batteries
Swap in the spare 2700 mAh cell mid-session instead of stopping to recharge.
Technical Specifications
- Technology
- Hybrid Multi-Au: synchronized VLF frequencies + PI ground processing
- Frequency Range
- 12 to 76 kHz
- Ground Balance
- Easy-Trak continuous automatic / Quick-Trak fast manual
- Sensitivity
- 10 manual levels / Automatic / Auto+
- Interference Cancel
- Automatic at power-on, scans for electromagnetic interference sources
- Target ID
- Digital 0 to 99 with Gold Probability indicator
- Audio
- Echo Wave (default), internal speaker plus 3.5mm headphone output
- Volume
- 12 adjustable levels
- Screen
- High-contrast LCD screen
- Length
- Folded: 65 cm (25.6 in)
- Weight
- 1.25 kg (2.75 lb)
- Shaft
- Lightweight telescopic carbon fiber
- Standard Search Coil
- GM2000-05 5-inch round Double-D, waterproof
- Battery
- 2700 mAh replaceable lithium-ion battery, with a backup battery
- Waterproofing
- Coil waterproof to 1 meter / control box rain-resistant IP55
- Warranty
- Official warranty on the control box and coil
- Country of Origin
- Australian brand
What's in the Box
- Main control box
- GM2000-05 5-inch round Double-D waterproof search coil
- Telescopic carbon fiber shaft
- Wired earphones
- Two rechargeable lithium-ion batteries
- AC charger and car charger
- Quick start guide
Who Should Use the Minelab Gold Monster 2000?
Serious prospectors working highly mineralized ground such as red dirt and black sand
Multi-Au's PI ground engine holds a stable signal in red dirt and black sand that overwhelm single-frequency VLF machines.
Anyone seeking performance close to PI detectors combined with the light weight and precision of a VLF detector
You get PI-like ground handling at 1.25 kg, without stepping up to a full-size, heavier pulse-induction detector.
Working in bedrock crevices and difficult soil with high stability
Continuous Easy-Trak tracking keeps the ground signal steady while you pick through cracks and inconsistent, patchy soil.
Upgrading from the Gold Monster 1000 for stronger ground performance
Same easy-to-carry form factor as the 1000, but with a wider frequency range and PI processing for tougher ground.
Related Products
Not Sure if This is the Right Detector?
Send us your terrain, target type, and budget, and our team will shortlist the models — and any accessories — worth considering.
We typically reply within the hour during office hours