Minelab Gold Monster 1000
Minelab built the Gold Monster 1000 around automation — a 45 kHz VLF detector with a 24-bit processor, automatic ground balance, sensitivity, and noise cancelling, so first-time prospectors can start finding gold without learning a manual settings menu.
Factory-Genuine Stock
Authorized, not grey-market
Insured Nationwide Shipping
Delivered anywhere in Pakistan
International Warranty
Honored through our service center
Training on Setup
Included with every purchase
Minelab built the Gold Monster 1000 around automation — a 45 kHz VLF detector with a 24-bit processor, automatic ground balance, sensitivity, and noise cancelling, so first-time prospectors can start finding gold without learning a manual settings menu.
Most gold VLF detectors ask you to dial in ground balance, sensitivity, and noise rejection before you can trust a signal. The Gold Monster 1000 does all three automatically, pairing a 45 kHz frequency with a 24-bit digital processor so beginners get sensitivity to both fine flakes and larger nuggets from the first sweep.
Easy-Trak ground balance runs continuously in the background, tracking soil changes as you walk rather than requiring you to stop and recalibrate — useful in salt-affected or inconsistent ground where a fixed setting would drift into false signals.
Because it copes better with conductive, salty ground than many higher-frequency VLF machines, it holds up in coastal or mineral-rich soil where lesser detectors start chattering. Two dedicated search modes — Gold, which ignores iron, and Deep Metal — let you match the sweep to what you're actually looking for, while ferrous/non-ferrous discrimination trims out obvious junk before you dig.
Sensitivity runs on Auto, Auto+, or ten manual steps, noise cancellation resets itself at power-up, and the Gold Chance Indicator gives a simple visual lean toward gold and away from iron and hot rocks — three pieces of automation that add up to less guesswork per target.
Key Features
45 kHz Frequency
Tuned for strong sensitivity to gold at the small end of the size range, from fine flakes to nuggets.
24-Bit Processor
Cleans up the signal path so genuine targets come through with fewer false responses.
Automatic Easy-Trak
Tracks changing soil continuously as you sweep, with no need to stop and recalibrate by hand.
Gold Chance Indicator
Gives an instant visual read on how likely a signal is gold before you dig.
Automatic Sensitivity and Noise Cancel
Sets itself at power-up, cutting setup time down to almost nothing.
Lightweight
At 1.25 kg, it won't wear down your arm over a full day of swinging.
Waterproof Coil
Rated to 1 meter, so wading into shallow creek edges isn't off-limits.
Technical Specifications
- Technology
- Single-frequency VLF with 24-bit digital signal processor
- Frequency
- 45 kHz
- Ground Balance
- Continuous automatic (Easy-Trak) / Manual
- Sensitivity
- Automatic / Auto+ / 10 manual levels
- Noise Cancel
- Automatic at power-up
- Discrimination
- Ferrous / non-ferrous with Gold Chance Indicator
- Display
- Simple, easy-to-read LCD screen
- Length
- Adjustable: 97 to 132 cm (38 to 52 in)
- Weight
- 1.25 kg (2.76 lb)
- Standard Search Coil
- 5-inch round DD waterproof coil
- Optional Coil
- 10-inch DD coil for wider coverage (sold separately)
- Battery
- Two rechargeable lithium-ion batteries, 10-12 hours runtime
- Waterproofing
- Coil waterproof to 1 meter / control box rain-resistant
- Headphones
- Wired headphones included
- Warranty
- Official warranty on control unit and coil
- Warranty Period
- 2 years
- Brand Origin
- Australian brand
What's in the Box
- Main control unit (control box)
- 5-inch round DD waterproof search coil
- Wired headphones
- Two rechargeable batteries
- Charging cable
- User manual
Who Should Use the Minelab Gold Monster 1000?
Beginners wanting a fully automatic, easy-to-learn gold detector
Every core setting runs itself, so someone who has never swung a detector before can start finding gold on day one.
Experienced prospectors looking for a lightweight VLF detector
At 1.25 kg it's light enough for veterans to carry as a fast, no-fuss VLF option alongside heavier PI gear.
Searching for small gold pieces in mineralized ground
The 45 kHz frequency and 24-bit processor pick out fine gold that lower-frequency machines can miss in tricky soil.
Working bedrock cracks, tailings piles, and dry washes
Continuous Easy-Trak ground balance keeps false signals down while you work crevices and old tailings piles where junk signals stack up.
Related Products
Not Sure if This is the Right Detector?
Send us your terrain, target type, and budget, and our team will shortlist the models — and any accessories — worth considering.
We typically reply within the hour during office hours