Minelab Go Find 11
Go Find 11 is Minelab's simplest way into the hobby — under 1 kg, foldable to 55.5 cm, running one audio tone and two search modes through an 8-inch coil that's waterproof to a meter, so it's ready to learn in minutes, not weekends.
Factory-Genuine Stock
Authorized, not grey-market
Insured Nationwide Shipping
Delivered anywhere in Pakistan
International Warranty
Honored through our service center
Training on Setup
Included with every purchase
Go Find 11 is Minelab's simplest way into the hobby — under 1 kg, foldable to 55.5 cm, running one audio tone and two search modes through an 8-inch coil that's waterproof to a meter, so it's ready to learn in minutes, not weekends.
If you've never swung a detector before, Go Find 11 is where Minelab expects you to start. Controls are limited to what you actually need — two search modes and one tone — so there's nothing to get lost in on your first trip to the park, beach, or backyard.
The body folds down to 55.5 cm and weighs about a kilogram, light enough for kids and for anyone who'd rather not carry a heavier rig on a long walk. The 8-inch coil is waterproof to a meter, which covers stream edges and the shallow water at a beach without any special care.
Two search modes — all-metal or iron rejection — and a single audio tone are the whole feature set, and that's the point: you get a direct, uncomplicated signal instead of a screen full of numbers to interpret, which makes it a genuinely good first machine for beginners and families.
Key Features
Light and Compact
At about 1.0 kg and folded to 55.5 cm, it's easy to carry on a long walk or stash in a car boot.
8-Inch Waterproof Coil
Waterproof to a meter, so stream edges and shallow surf are no problem for the coil.
Single Audio Tone
One consistent tone keeps target feedback simple while you're still learning to read signals.
Two Search Modes
Switch between full all-metal response and iron rejection depending on what you're digging for.
3 Sensitivity Levels
Three settings are enough to match ground conditions without overcomplicating setup.
Intuitive Controls
There's little to configure, so you're detecting within minutes of opening the box.
Clear LCD Screen
Shows battery level, active search mode, and sensitivity at a glance.
Technical Specifications
- Operating Frequency
- 8 kHz
- Search Modes
- Two modes: All Metal / Iron Discrimination
- Sensitivity Levels
- 3 levels
- Target Tones
- Single audio tone
- Target Discrimination Segments
- 4 segments
- Water Resistance
- Coil only, up to 1 meter (3.3 ft)
- Length
- Extended: 130.5 cm / Folded: 55.5 cm
- Weight
- 1.0 kg (2.2 lb)
- Display
- Monochrome LCD screen
- Coil Size
- 8-inch single-loop rectangular coil
- Battery
- 4x AA batteries (not included)
- Audio Output
- Built-in speaker or 3.5mm wired headphones
- Country of Manufacture
- Malaysia
- Warranty
- 2 years
What's in the Box
- Main unit (control box) and folding shaft
- 8-inch waterproof rectangular search coil
- Camo stickers (2 pieces)
- User manual
- Warranty certificate
Who Should Use the Minelab Go Find 11?
Beginners taking their first steps into metal detecting
Two modes and a single tone mean there's no setup to get wrong before your first real signal.
Family activities in parks and gardens
Light enough at 1.0 kg for kids to carry comfortably through a full afternoon in the park.
Coin and small jewelry hunting on the beach
The 8-inch coil and iron-rejection mode filter out bottle caps and pull tabs while you search for coins and small jewelry.
Use near shallow water thanks to the waterproof coil
Coil waterproofing to a meter lets you work stream edges and the shallow surf line without extra precautions.
Related Products
Not Sure if This is the Right Detector?
Send us your terrain, target type, and budget, and our team will shortlist the models — and any accessories — worth considering.
We typically reply within the hour during office hours